Are you looking for an affordable yet compelling way to split signals to multiple devices? Though there are various options available, using a cable splitter is one of the best ones.
These splitters are widely accepted and perfect if you want to split signals to two to four devices. And the best part is their convenient usage.
How? Let’s check it right here!
What is a Cable Splitter?
It is a small device designed to split one signal among numerous devices. It appears like a small box where one cable runs in and is divided into two parts to two different ends.
This tool comes in various variations and configurations like 2-way, 6-way, 4-way, 3-way, and even 16-way. Hence, using it you can connect to numerous devices.
The advanced cable splitters allow you to achieve HD quality signal transfer to various devices without compromising on signal strength.
What are the Different Kinds of Cable Splitters?
Cable splitters are available in a variety of types. Consider all options before buying one.
Standard Cable Splitter
A standard cable splitter comes with 3 ports for attachments. It is easy to set up this splitter.
Its main use is for routing cable to various areas across the house. You can also connect more than one TV to a network using this splitter.
Such splitters work better with smart HDTVs. They allow conversion of HDMI video and audio signals into coax and transmit the same over miles. They work the same way as HDMI cables.
Using this splitter is recommended if you want to combine antenna signals with satellite signals. Their core function is to split cables into the device’s direction. The cable connecting the diplex is divided into various directions.
Such a splitter not only divides the signal but also amplifies it to some extent. It works great with long cables and is useful if you want to both divide and boost the signal strength.
How Does Cable Splitters Work?
Cable splitters are useful when you want networks in two different rooms or areas from a single signal source. The most common use is in-home or office.
To receive signals on both rooms and devices, you can either install a setup box in every area or use a splitter to share the connection between the two.
Depending on your splitter, you may generate dual or multiple outlets for one signal. It is a compact box that goes from single input to numerous outputs for the convenience of the users.
Usually, when one signal splits through the device, it loses some strength and becomes weak. In most cases, a 2-way splitter contains just 50% strength of the main signal while a 4-way splitter contains 1/4th strength of the main signal.
For such reasons it is better to use a splitter and keep the splits to a minimum so that you can avail of the desired speed of the signal.
- Xfinity Error: Started Unicast Maintenance Ranging – No Response Received [Solved]
- [Issue Solve] Sorry we ran into a problem please restart the video player ATT
- How Do I Change My Centurylink WiFi Password? [My Centurylink App]
- How To Use a Laptop as a Monitor?
- How To Setup Netgear Nighthawk Ac1900 Modem Router?
- Is HDMI Coupler Really Low Down the Signals?
How to Use a Cable Splitter to Get Cable in Another Room?
You may use a cable splitter for connecting the TVs in different rooms of your house. For this, your room must be properly wired.
After wiring, you may connect the receiver to the cable in rooms or use a coaxial splitter instead.
If you have two receivers, you may use a 2-way splitter and link it to the main cable.
Next, connect the output port of your splitter using a coaxial cable and the input port with the other end of the device.
Secure the receiver to the TV set with an RCA component, coaxial cable, or HDMI.
How To Use A Splitter For Cable Tv?
For using the splitter for the internet and TV, you need to follow these steps:
- Select a Connection Place
It is first important to decide on a suitable location for your splitter. It is good if you choose a spot close to the cable line.
The length of your coaxial cable must be equivalent to the distance between the devices and splitter.
2. Disconnect All Lines
Now, disconnect the cable line from all connecting units. All devices must be turned off for a moment so that you experience no shocks or currents.
3. Connect the Cable Lines
Join the input end of the splitting devices to the cable line. Also, join the output port of the splitter to the coaxial cable and to devices you wish to use.
4. Tighten all Connecting Points
It is now time to fasten all connecting points on cable by hand or using a wrench or plier to get optimum results. The splitter or devices must not be damaged. Hence, do it carefully.
5. Make Sure all Devices Receive Signals
Once the installation part is complete, you need to test the signal strength for each connected device. Reboot the devices and check if they are getting the internet and TV signal properly.
6. Additional Tip
Here I share an additional tip or step.
You may install the cable outlet to gain a mess-free setup. For quicker speed, it is best to use a wireless router near the laptop or PC. It ensures you never experience signal issues while doing an important task.
How to Fix the Common Problems of Cable Splitters?
Installing and using a cable splitter is simple. But there are numerous challenges or issues, which you may experience.
This problem occurs when there are more than two TVs to connect to one splitter. The signal may get weak or in some cases, there can be a complete loss of the signal. To solve this problem you may either reduce the numbers of splits or use an amplified coax device.
Inadequate Cable Splitting
Most homeowners purchase a multiple-way splitter even when the requirement is a two-way or three-way unit.
Using a multiple-way splitter means one signal is splitting into numerous ports, which reduces signal quality and power.
Hence, it is important to purchase the right type of splitter and use multiple units only when you need it the most.