HDMItechnologies is reader-supported. As an Amazon Associate We earn from qualifying purchases.

How To Daisy Chain Routers – Unleashing the Simplest Ways!

Continuous network lagging and interrupted internet speed is not only frustrating but hinders your productivity, be it work or gaming. Alarmingly, you can end up in a dead zone with ‘zero’ network connectivity.

The reasons for this problem can be many but the ultimate solution is only one – Daisy Chain Routers. Daisy-chaining your routers is one of the simplest ways to resolve these and other network problems and avail of a smooth internet connection in the entire area.

The process is simple and intends to extend your signal so that you can enjoy seamless internet speed. So, how to go about it? We share the simplest ways to get this done so that you can boost the overall internet reception and signal and enjoy the best experience ever.

Why Daisy Chain Routers?

Daisy chain routers is a good solution to combat the following problems:

  1. Connectivity lags
  2. Interrupted network
  3. Dead zones in house or office
  4. Network slowdown
  5. Experiencing problems in streaming movies
  6. Witnessing glitches full gaming experience

Getting Prepared to Daisy Chain Two Routers

To successfully daisy-chaining two routers, you need to do some basic preparation. For this, you need the following supplies ready:

  1. Your first/original router, which you are presently using
  2. Another router / second router, which must be compatible with your ISP and modem
  3. Ethernet cables for connecting two routers and extending signal strength

How to Prepare the Second Router for a Daisy Chain Connection?

Now, before you follow the steps to daisy chain routers, you need to prepare your second router. Though you don’t have to make too many adjustments to the settings, you need to prepare it for connectivity through Ethernet cable to the primary router.

If you aren’t confident enough, you can seek professional help. The two important steps to prepare your second router are:

Step 1 – Reset Router

Make sure your second router does not have haywire or base settings as it is an obstacle in forming a daisy chain connection. Reset the router and configure its settings so that it matches the original router.

This is necessary to maintain the compatibility of both the routers and boost internet speed. To reset the router, you need to enter the router’s IP address on the web browser and follow important steps.

Step 2 – Disable DHCP

DHCP or Dynamic Host Configuration Protocol is necessary to reduce redundancy or incompatibility that happens between two routers after a secured connection. When you disable DHCP, it effectively prevents the second router from determining the numerous IP addresses, which are linked to the device.

Importantly, there are different ways to disable the DHCP of routers with distinct configurations. Here are the instructions for the same.

How to Disable DHCP in Windows 10 / Windows 8?

Step 1 – Open the ‘Network connections’ section.

Step 2 – Open and double click on the active network connection.

Step 3 – Click on the Properties feature and you will check distinct Internet Protocol versions. Here, you need to choose IP version 4.

Step 4 – Click on the Properties option again.

Step 5 – Here you need to click on the option for ‘Use the Following IP.’

Step 6 – You have to enter the IP address details along with values for Subnet Mask and use the Default Gateway.

How to Disable DHCP in Windows 7?

Step 1 – Open the Control Panel section.

Step 2 – Here the option of ‘Network and Sharing Center’ will come. Choose it and you will see the Local Area Connection Link.

Step 3 – You need to click on the option for ‘Properties’ and you will check distinct versions for Internet Protocol. Here, you need to choose version 4 of Internet Protocol.

Step 4 – Again open the option for Properties.

Step 5 – Now, you need to click on the option ‘use the following IP.’

Step 6 – You have to enter the IP address, values for Subnet Mask and the Default Gateway.

How to Disable DHCP in Apple Devices?

The operating system is different from Windows. It incorporates an AirPort Express inside the device, which is an exceptional quality wireless extender system.

Step 1 – Check the AirPort Utility section within the Applications folder.

Step 2 – You see the ‘Base Station’ option along with the edit feature.

Step 3 – Click on the Network button and a new menu will appear.

Step 4 – Switch it ‘Off’ or choose the Bridge Mode from the menu.

Once the disabling process is done, you may now move ahead with the steps to Daisy Chain routers.

How to Daisy Chain Routers?

After successful completion of the basic preparation process and getting ready with the supplies, you need to follow these steps to establish a Daisy Chain connection. For this, you must have a basic technical understanding.

Step 1 – Find the IP Address and Subnet of the Primary Router

It is first important to find the IP address and subnet of the first router. This is useful for assigning connected devices. If you use Windows PC, you may follow the steps:

  • Open the search bar and enter cmd, following the command prompt pops up.
  • When it pops up, you need to enter the ‘ipconfig’ to get the device’s IP address.
  • Enter the IP address and the subnet of the device to keep a note of the same.

Step 2 – Assign the Novel Router’s Subnet under the Original One

After entering the IP address and the subnet of the original router, you need to assign the novel router of an IP address under the original one. You must use this as the static IP address, which will be identifiable by the original router as the extension to its settings.

Step 3 – Network Mask

With the subnet and IP address done, the next step is to make sure that both routers use the same network mask. It is extremely vital to keep a check on to make sure of heightened compatibility.

Step 4 – Plugging and Connecting

Next, you need to bring the Ethernet cable and plug in the two routers. You may connect the Ethernet cable to the LAN port. Once you connect the two, you may check the Wi-Fi signals of two routers to make sure that none of them is overlapping.

Step 5 – Lockdown the New Router

Finally, you must lock down the second router to maintain absolute safety. This ensures there are no threats or issues to the routers or IP addresses that you use. It is an extremely vital step. So, if you don’t know how to do it, you may take professional help. The best way to lock down the router is to change the password.

Some Common Queries Answered

Q. Is it Possible to Daisy Chain Two Routers?

A. We have shared above our detailed guide on how you can easily daisy chain two routers. Hence, it is right to say that you can daisy chain two wired or wireless routers, ensuring you follow all the steps correctly.

Importantly, your router must equip all features essential to make such a connection. But if you have an outdated router, establishing a daisy chain connection can be difficult.

Q. Is it Possible to Daisy Chain More than Two Routers?

A. Though it is difficult, but not impossible. The process is quite complex. So, we suggest you ask for professional assistance as otherwise, it could create a complete mess of cables and wires.

Q. Does Daisy Chaining Routers Slow Down the Network?

A. Daisy-chaining routers are beneficial for your growing business, but it can result in network slowdowns. It is because the data packets have to move through additional routes to reach their eventual destination. The increased passage complexity slows down the network.

Q. Does Daisy Chaining Routers Affect Network’s Security?

A. No. If you properly lock the routers and have a secured IP address, you can securely carry the daisy chain process. It ensures that your routers and identity stay secure online.

On a Final note

Daisy-chaining routers are highly` useful for you if you are a gamer, loves streaming, run multiple applications at a time, or have a big office or house and want extended internet connectivity on a budget.

The process is quite simple and with our guide, you will definitely be able to carry it easily. Just go ahead with it and boost your internet signal without spending money.



I am Steven S. Martin, the person behind HDMITechnologies. Personally, I run my tech hub in Texas and used almost thousands of devices for my hub for the last 15 years. I put all my experiences and knowledge to make your decision better and valuable.

Leave a Comment