HDMI vs DVI vs MHL vs ARC: Ports and Standards Explained

These four labels show up on TVs, monitors and old phones, and they’re easy to mix up. Here’s the short version:

  • HDMI carries video and audio in one cable. It’s the standard on TVs, consoles, laptops and streaming devices.
  • DVI carries video only. It’s an older computer monitor connection.
  • MHL was a way to send video from a phone’s micro-USB port to a TV’s HDMI port. It’s mostly obsolete now.
  • ARC isn’t a separate cable. It’s a feature of certain HDMI ports that sends TV audio back to a soundbar or receiver.

You may also see an HDMI port labeled STB. That just means “set-top box.” It’s a normal HDMI input the TV maker suggests for your cable or satellite box.

Quick Comparison

HDMIDVIMHLHDMI ARC
What it isAudio + video connectionVideo-only connectionPhone-to-TV video standardAudio-return feature on an HDMI port
Carries audioYesUsually noYesYes (TV to audio system)
Typical devicesTVs, consoles, laptops, streamersOlder monitors and PCs2011 to 2015 era Android phonesTVs, soundbars, receivers
Max resolutionUp to 4K/8K and 144Hz+ (HDMI 2.1)About 2560×1600 at 60Hz (dual-link)1080p to 4K, depending on versionN/A (audio only)
Still relevant in 2027YesOnly for older monitorsMostly noYes (and eARC)

HDMI: The Everyday Standard

HDMI sends uncompressed digital video and multichannel audio over one cable, plus control signals (HDMI-CEC) that let one remote run several devices. Newer versions add features:

VersionKey capability
HDMI 1.44K at 30Hz, 1080p at up to 120Hz, ARC
HDMI 2.04K at 60Hz, 1440p at 144Hz, HDR
HDMI 2.14K at 120Hz+, 8K, VRR, eARC, 48 Gbps

See HDMI 2.1 vs 2.0 and HDMI-CEC explained for details.

DVI: Video Only, Mostly for Old Monitors

DVI came before HDMI and uses the same type of digital video signal, which is why simple HDMI-to-DVI adapters work without any power or converter box.

  • DVI-D is digital only. Most adapters are made for this.
  • DVI-I carries digital and analog (VGA-style) signals.
  • DVI-A is analog only and rare.
  • Single-link DVI tops out around 1920×1200 at 60Hz; dual-link reaches about 2560×1600.

The big catch: DVI usually doesn’t carry audio. If you connect a laptop’s HDMI to a monitor’s DVI port, you’ll get a picture but need speakers or headphones for sound. If you hear nothing over HDMI, see why HDMI has no sound.

DVI also struggles with high refresh rates. For 144Hz gaming, see how to get 144Hz with HDMI or use DisplayPort. Compare in DisplayPort vs HDMI.

MHL: The Old Phone-to-TV Trick

MHL (Mobile High-Definition Link) let some Android phones output video through their micro-USB port using an MHL adapter, often to a TV’s HDMI port marked “MHL.” That port could also charge the phone.

Today, MHL is largely gone:

  • Most phones moved to USB-C, which uses DisplayPort Alt Mode for video out, not MHL
  • Many phones now skip wired video entirely and use wireless casting

If your TV has an “HDMI/MHL” port, it works as a normal HDMI input for everything else. For modern phones, use a USB-C to HDMI adapter (if your phone supports video out) or cast wirelessly. See how to watch movies from your phone on TV without HDMI.

ARC and eARC: Audio Back to Your Sound System

Normally, HDMI sends audio into the TV. A port labeled ARC (Audio Return Channel) can also send the TV’s audio out to a soundbar or receiver over the same cable. That’s how sound from the TV’s built-in apps reaches your speakers without an extra optical cable.

eARC is the upgraded version with much more bandwidth for lossless formats like Dolby TrueHD and full Dolby Atmos.

What Do Other HDMI Port Labels Mean?

LabelMeaning
STBSuggested port for a set-top (cable or satellite) box; works like any HDMI input
ARC / eARCAudio return to a soundbar or receiver
MHLSupports old MHL phone adapters; normal HDMI otherwise
4K@120 / 144HzThe port supports high refresh rates (HDMI 2.1 bandwidth)
DVIOn some older TVs, an HDMI port that accepts audio separately from a PC’s DVI output

On many TVs, only some HDMI ports support the highest features. Use the 4K 120Hz port for consoles and the ARC port for audio. If a port seems dead, see how to know if your HDMI port is bad.

Real-World Example

Say you have a 2014 Dell monitor with only DVI and VGA, and a new laptop with HDMI. A $10 HDMI-to-DVI cable gives you a sharp 1080p picture right away. Sound, though, still plays from the laptop speakers, because DVI doesn’t carry audio. Plugging a pair of speakers into the laptop’s headphone jack completes the setup.

FAQs

Does an HDMI-to-DVI adapter reduce picture quality?

No. Both use the same digital video signal, so the picture is identical. You only lose audio and some newer HDMI features.

Can I plug my cable box into a port that isn’t labeled STB?

Yes. Any HDMI input works. The STB label is just a suggestion, sometimes tied to CEC or picture presets.

Can I use DVI for gaming at 144Hz?

Dual-link DVI can reach 144Hz at 1080p on some monitors, but HDMI 2.0+ or DisplayPort is easier and more reliable.

Does my USB-C phone support MHL?

Almost certainly not. USB-C phones that support wired video use DisplayPort Alt Mode, and many phones don’t support wired video at all.

Do I need a special cable for ARC?

Any standard High Speed HDMI cable supports ARC. For eARC, use a High Speed with Ethernet or Ultra High Speed cable.

My TV has only one ARC port, and I need it for my console. What now?

Plug the soundbar into the ARC port and the console into another HDMI port. The TV sends console audio to the soundbar over ARC.



Leave a Comment